Product | Specifications | Chemical Composition | Shape/ Packing |
Aluminium Titanium Boron Refining agent AlTiB | AlTi3B1 AlTi5B1 AlTi5B0.6 AlTi5B0.2 | 3%Ti-1%B 5%Ti-1%B 5%Ti-0.6%B 5%Ti-0.2%B |
Dia.9.5mm (±0.5), 180kgs/coil, 3coils/pallet Or as per needs |
Aluminium Titanium Carbon | AlTi3C0.15 | AlTiC 3/0.15, Fe 0.2%max, Si 0.2%max, V 0.05%max, other each 0.03%max, other total 0.1%max | |
Aluminium Titanium AlTi master alloys | AlTi5% AlTi10% | 4.5% - 5.5%Ti 9% - 11% Ti |
Waffle plate appx. 7-8kg / pc |
Aluminium Silicon | AlSi20% AlSi30% AlSi50% | 20%Silicon, balance Aluminium 30%Silicon, balance Aluminium 50%Silicon master alloy, balance Al | |
Aluminium Manganese AlMn master alloys | AlMn10% | 9% -11% Mn, balance Aluminium | |
Aluminium Iron AlFe master alloys | AlFe10% | 9% -11% Fe, balance Aluminium | |
Aluminum Boron AlB master alloys | AlB4, AlB5%, AlB8, AlB10% | 10% Boron, balance Aluminium | |
Aluminium Strontium AlSr master alloys | AlSr5%, AlSr10%, AlSr15% | 9-11% Strontium, balance Aluminium | Cut rods, small ingot /wires |
Packing: wooden pallets, shrink-wrapped or wooden box
Applications: To achieve better mechanical properties, easy processing, rolling and extrusion etc, in casthouses, rolling mills and remelt smelters'
aluminium processing, grain refiner TiBAl is very critical for aluminum grain size control, it's a routing industrial process for casting/ wrought aluminum,
particularly DC casting, by addition of grain refining agent AlTiBor to molten aluminum, typical masteralloy for aluminum grain refinement is Al-5%Ti-1%B,
it improves performance and surface, refine/reduce the grain size and improve grain distribution, eliminates hot tearing in cast structures of aluminium billets
or AlMgSi and AlSi alloys, to achieve fine grain structures throughout the foundry casting alloys, faster casting speeds, also improved mechanical properties
and enhanced ductility in aluminium foundry alloys. With grain refiner Al-5Ti-1B, AlTiB 5/1, AlTiB 3/1, AlTiB 5/0.6, Aluminium-Titanium-Carbon AlTiC 3/0.15
added into molten aluminum for a grain refinement purpose, thus evenly distributed particle size under microscope obtained.
Compared to Al-Ti-B, Aluminium Titanium Carbon AlTiC Grain Refiner Master Alloyshows more advantages on high strength Al alloys containing Zr, Cr, Mn elements
eg. 7xxx aerospace alloys, and no "poisoning effect" detected. TiC particles is smaller and less tendency to agglomerate in the melt than TiB2 particles.
Titanium boron TiBor 5/1 wire diameter φ2mm φ3mm, customized type for aluminium piston alloys ZL109, KS1295, FM S2N grain refinement use.
Grain modifiers of Strontium Aluminium AlSr5% AlSr10% cut rods sticks, bar, coils are commonly used as a role in modifying aluminium-silicon
casting alloys (Silicon modification), effecting microstructure, mechanical strength and ductility of aluminium based extrusion alloy 6061 etc.
Aluminum Boron master alloys AlB4, AlB5, AlB8, to improve electrical conductivity of aluminium alloy rod wires & cables.
Element alloying additives: Mn75Flux, Fe75Flux, Cr75Flux/AL, 500g tablets
